Technology of Well Testing and Completion for Highly-deviated Slim Hole Well in Kuqa’s Piedmont

doi:10.3969/J. ISSN.1006-768X.2020.01.14

Drilling & Production Technology ›› 2020, Vol. 43 ›› Issue (1): 45-48.DOI: 10.3969/J. ISSN.1006-768X.2020.01.14

• PRODUCTION TECHNOLOGY • Previous Articles Next Articles

Technology of Well Testing and Completion for Highly-deviated Slim Hole Well in Kuqa’s Piedmont

XU Penghai¹ , ZHANG Hao¹ , ZHANG Sha², LIN Yan³ , WANG Lei¹ , GAO Zunsheng¹ and ZHOU Mengqiu¹

1 . Exploration Department of PetroChina Tarim Oilfield Company, Korla, Xinjiang 841000, China;2. Engineering Technology Department of PetroChina Tarim Oilfield Company, Korla, Xinjiang 841000, China; 3. Laojunmiao Production Plant, Yumen Oilfield Company

Online:2020-01-25 Published:2020-01-25
Supported by:

库车山前大斜度小井眼试油完井工艺技术

徐鹏海¹, 张浩¹, 张莎², 林燕³, 王磊¹, 高尊升¹, 周梦秋¹

1 中国石油塔里木油田分公司勘探事业部 2 中国石油塔里木油田分公司工程技术部 3 玉门油田分公司老君庙采油厂

作者简介:徐鹏海( 1987-) , 工程师, 2012 年毕业于西安石油大学石油工程专业, 现从事探井、评价井的试油完井生产管理工作。地址:( 841000) 新疆库尔勒石化大道 26 号塔指小区, 电话:15276143086, E-mail:372654376@ qq. com
基金资助:
国家科技重大专项子课题“ 超深超高压高温气井试油、完井及储层改造配套技术” (编号:2011 ZX05046-04) 。

Abstract

Abstract: The reservoir in the Kuqa piedmont has the characteristics of deep buried, high temperature and high pressure. The harsh wellbore conditions have brought great challenges to the completion of oil trial. In recent years, due to the limitations of geological engineering and surface conditions, a number of ultra-deep and highly-deviated wells have begun to be deployed. The pipe column, perforated pipe column, test pipe column and the completed pipe column of the highly-deviated wells are limited by the well slope, and the well conditions are more complicated than the conventional vertical wells. At the same time, there are great bending resistance and high construction pressure difficulties during highly-deviated well fracturing operations. Based on the difficulties mentioned above, this paper introduces the completion technology of the first highly-deviated well testing in Kuqa piedmont and its supporting technology. It provides favorable technical support for the oil completion technology of highly-deviated wells in Kuqa piedmont in the later period.

Key words: , Kuqa piedmont, large slope, slim hole, high pressure oil and gas well, test well completion

摘要： 库车山前储层具有埋藏深、温度高、压力高的特点，恶劣的井筒条件给试油完井带来了极大的挑战。近年来，由于地质工程及地表条件的限制，一批超深、大斜度井开始部署，大斜度井通井管柱、射孔管柱、测试管柱、完井管柱受井斜限制，与常规直井相比井筒条件更加复杂。同时，大斜度井压裂时存在弯曲摩阻大，施工压力高等难点。文章从上述难点出发，介绍了目前库车山前首口大斜度井试油完井工艺及其配套技术，通过施工表明配套工艺能够满足大斜度井试油完井、提产的需要，为后期库车山前大斜度井的试油完井技术提供了有利的技术支撑。

关键词: , 库车山前, 大斜度, 小井眼, 高压油气井, 试油完井

CLC Number:

XU Penghai, ZHANG Hao, ZHANG Sha, LIN Yan, WANG Lei, GAO Zunsheng, ZHOU Mengqiu. Technology of Well Testing and Completion for Highly-deviated Slim Hole Well in Kuqa’s Piedmont [J]. Drilling & Production Technology, 2020, 43(1): 45-48.

徐鹏海, 张浩, 张莎, 林燕, 王磊, 高尊升, 周梦秋. 库车山前大斜度小井眼试油完井工艺技术[J]. 钻采工艺, 2020, 43(1): 45-48.

References

[1] 胡浩华, 白学东, 程战民, 等. 大斜度井 MFE 测试工艺探讨[ J] . 油气井测试,2004( 3) :38 - 39.
[2] 任爽, 冯仁东, 刘会琴, 等. 大斜度井气举完井管柱研究及应用[ J] . 石油机械,2010( 6) :73 - 75 .
[3] 张立民, 况雨春, 张建忠, 等. 大斜度井封隔器解封力数值模拟方法研究[ J] . 石油机械,2015( 9) :87 - 90.
[4] 惠朋. 大斜度井采油配套工艺研究[ J] . 化工设计通讯,2017( 6) :50 - 51 .
[5] 李灵芝, 尹必香. 大斜度井环空测试技术的研究与应用[J] . 西部探矿工程,2004,102( 11 ) :57 - 58.
[6] 张世林, 于长录, 高和记, 等. 丛式井试油测试工艺技术[ J] . 油气井测试,2009( 5) :35 - 39.
[7] 甘庆民, 杨承宗, 黄伟, 等. 大斜度井井下工具通过能力分析[ J] . 石油矿场机械,2008( 7) :59 - 61 .
[8] 刘永刚, 陈春梅. 大斜度井中不同管柱下入的可行性分析[ J] . 中国石油和化工标准与质量,2013( 6) :67.
[9] 李艳飞, 葛俊瑞. 海上超深大位移大斜度井射孔技术研究与应用[ J] . 海洋石油,2018( 2) :72 - 76.
[10] 聂勋勇. 大位移井井眼净化的解决方法[ J] . 内蒙古石油化工,2014( 22) :42 - 45 .
[11 ] 张振兴, 李清, 阎宏博, 等. “ 两速” 对大斜度井井眼净化的影响[ J] . 石油化工应用,2010( Z1 ) :90 - 94.
[12] 马永峰. 大斜度井保持井眼清洁的有效方法[ J] . 钻井液与完井液,2003( 5) :57 - 58.
[13] 杨树人, 张景富. 大斜度井中钻井液携屑规律的实验研究[ J] . 大庆石油学院学报,1997( 1 ) :128 - 131 .
[14] 牛增前, 隋向云, 张平, 等. 大斜度井压裂工艺研究[ J] .石油钻采工艺,2005( S1 ) :69 - 71 .
[15] 杜波, 高咏梅. 张家垛油田大斜度井压裂工艺技术研究[ J] . 油藏评价与开发,2017( 5) :58 - 63 .
[16] 付大其, 程运甫. BS 区块大斜度井分段压裂工艺研究与应用[ J] . 石油与天然气,2013( 5) :140 - 142.
[17] 孔祥吉, 周玉斋, 钱锋, 等. 尼日尔 Agadem 油田大斜度井试油工艺探讨[ J] . 油气井测试,2015( 5) :56 - 57.
[18] 何毅. 浅谈塔里木小井眼试油完井工具现状[ J] . 江汉石油职工大学学报,2016( 3) :30 - 31 .
[19] 窦益华, 许爱荣, 张福祥, 等. 高温高压深井试油完井问题综述[ J] . 石油机械,2008,36( 9) : 140 - 142.
[20] 朱进府, 季晓红. 高温高压井测试工艺技术与装备[ J] .油气井测试,2005,14( 5) :48 - 51 .
[21 ] 吴奇, 郑新权, 邱金平, 等. 高温高压及高含硫井完整性指南[ M] . 北京: 石油工业出版社,2017:42 - 68.

[1]	WU Yan , YU Wenyan , LIU Yonghui , JIN Xinwei, ZHOU Yan , ZHU Kuanliang. Re-enter Test of Active Magnetic Measuring Technology in Open Hole with Fish [J]. Drilling & Production Technology, 2022, 45(6): 14-19.
[2]	LIU Jia , JING Jiajia, ZOU Xinbo , LIU Shuai , QU Xuefeng , BIAN Tao, LI Jun, LIU Xianfeng. Model Experimental System Development and Experimental Exploration of Hydraulic Cavitation Reservoir Stimulation [J]. Drilling & Production Technology, 2022, 45(6): 75-82.
[3]	LUO Fuquan, GENG Wenshuang, GAO Hecun, HOU Jian, GU Xiao, GAI Changcheng. Screening Method and Application for Gas-Assisted Gravity Drainage Adaptation Blocks in Edgewater Reservoir [J]. Drilling & Production Technology, 2022, 45(6): 83-89.
[4]	GAO Jinjian , HU Lanxiao, WANG Gang, YANG Wenshan. Experimental Study on the Effect of Fracturing Sand Ratio on Proppant Placement in Unconventional Reservoirs [J]. Drilling & Production Technology, 2022, 45(6): 90-95.
[5]	SHU Zheng, WANG Tongwang, LIAO Dong, QI Yong, CHEN Jiayu, CHENG Feibao, YANG Yalan, . Research and Performance Evaluation of Polymer Instant Device for Offshore Oil Displacement [J]. Drilling & Production Technology, 2022, 45(6): 113-117.
[6]	XU Xiaofeng , LI Yunfeng , WANG Changhao, LI Shibin, SONG Wei , ZHOU Yan , CHEN Chunlai. Bit Optimization of Deep Complex Lithological Formations in Jidong Oilfield [J]. Drilling & Production Technology, 2022, 45(5): 22-28.
[7]	SHAO Chun , CHEN Minghua , XU Lin, LONG Xiaoping , HU Chuang. Analysis of Relay Signal Transmission Characteristics of Electromagnetic Measurement-while-drilling Based on ANSYS [J]. Drilling & Production Technology, 2022, 45(5): 29-33.
[8]	XIAO Yang , ZONG Qingwei, LI Rong, WU Chunlin, LI Chunlin. Experiment of Floating Casing Technology in Long Openhole Horizontal Well in Western Sichuan [J]. Drilling & Production Technology, 2022, 45(5): 34-38.
[9]	WANG Hanxiang , WANG Jiaojiao , YU Changlu, LIU Yanxin. Key Technologies for Natural Gas Hydrate Mining [J]. Drilling & Production Technology, 2022, 45(5): 51-56.
[10]	XU Taibao , SHENG Tingqiang , NIU Decheng , QU Yuliang , SUN Baolong , XIE Wei , SU Jianbo, RUAN Linfeng. Application of Ultra-high Density and Equal Aperture Perforation Technology in Deep Water Gas Field in Western South China Sea [J]. Drilling & Production Technology, 2022, 45(5): 57-62.
[11]	YU Tianjun , ZHAI Zhongbo, QI Shiwei, LUO Xiangdong . New Ideas for the Development of Shan 1 and He 8 Reservoirs with Mixed CO2 Fracturing Technology in the South of Ordos Basin [J]. Drilling & Production Technology, 2022, 45(5): 63-68.
[12]	HE Qiuyun , HUANG Jingfu , WU Jun. Study on Contribution of Slip-joint to the APR Well Testing String in HPHT Well [J]. Drilling & Production Technology, 2022, 45(5): 75-79.
[13]	CAO Xuejun, FU Wei, LI Xiaobo, PENG Hanlin, ZHOU Yang, ZENG Xiaojian, LV Zhanchun. Plug Mill and Drift Technology in High Pressure with Coiled Tubing for Weirong Deep Shale Gas [J]. Drilling & Production Technology, 2022, 45(5): 80-84.
[14]	CHEN Weiyu , CHEN Qingdong , MOU Jianye. Calculation Method of Three-dimensional Acid Concentration on the Surface of Non-uniform Acid Etching Crack [J]. Drilling & Production Technology, 2022, 45(5): 85-89.
[15]	ZHANG Xin, QIAO Dongyu , WANG Xin, WANG Xindong , LI Fuqiang , ZHAO Yishu , TANG Shundong, TANG Liping, XU Xiaoxuan. Development and Application of a Rotary Percussion Drilling Apparatus for Improving Rate of Penetration [J]. Drilling & Production Technology, 2022, 45(5): 106-111.

Technology of Well Testing and Completion for Highly-deviated Slim Hole Well in Kuqa’s Piedmont

库车山前大斜度小井眼试油完井工艺技术

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments